Direct Extrusion 3D Printing for a Softer PLA-based Bio-polymer Composite in Pellet Form
Loading...
Files
Size: 3.22 MB, File format: Adobe PDF
Date
Authors
Singamneni, Sarat
Behera, Malaya Prasad
Truong, Derryn
Le Guen, Marie Joo
Macrae, Elspeth
Pickering, Kim
Supervisor
Item type
Degree name
Journal Title
Journal ISSN
Volume Title
Publisher
Elsevier BV
Abstract
Fused deposition modelling is the most popular method of 3D printing with a variety of polymers, but the raw materials are commonly in the filament form. Research has demonstrated the ability to use pellets for this process, which are easier to produce than filaments. Apart from the savings on the pre-processing, the approach also combines the good attributes of both injection moulding and 3D printing and referred to as extrusion 3D printing. Direct printing of pellets is especially suited for thermosensitive polymers, with which, repeated or excessive heating may lead to degeneration. Also, polymers that are too soft do not qualify for filament-based extrusion. PLA is a popular choice for fused deposition modelling in the filament form but is often too brittle. A softer version of PLA composite based on PBAT and cellulose fibres is proposed here for 3D printing. Considering the lack of stiffness of the filaments, direct extrusion from pellet form is evaluated. Regardless of form, the polymer material system satisfied the stringent conditions of consolidation as dictated by the dynamic combination of extrusion and rasterised material deposition. Experimental evaluation based on meso-structural and mechanical property analyses indicate the new pellet-based material system to be suitable and to perform well. The novelty of the material and process combination is that the printed samples were actually comparable mechanically to the injection moulded counterparts, which is an extraordinary achievement, considering the shortcomings typical of material consolidation in additive manufacturing.
Description
Keywords
Science & Technology, Technology, Materials Science, Multidisciplinary, Metallurgy & Metallurgical Engineering, Materials Science, Polymer composite, Soft PLA, Pellets, Extrusion, 3D printing, Consolidation, 4014 Manufacturing Engineering, 40 Engineering, 4016 Materials Engineering, Polymer composite, Soft PLA, Pellets, Extrusion, 3D printing, Consolidation
Source
Journal of Materials Research and Technology, ISSN: 2238-7854 (Print); 2214-0697 (Online), Elsevier BV, 15, 936-949. doi: 10.1016/j.jmrt.2021.08.044
Publisher's version
Rights statement
Permanent link
Endorsement
Review
Supplemented By
Referenced By
Creative Commons license
Except where otherwise noted, this item's license is described as Attribution-NonCommercial-NoDerivatives 4.0 International