Influence of Moisture in the Gypsum Moulds Made by 3D Printing

Simple item page
aut.relation.endpage1625
aut.relation.journalProceedia Engineeringen_NZ
aut.relation.startpage1618
aut.relation.volume97en_NZ
aut.researcherSingamneni, Sarat
dc.contributor.authorSingamneni, Sen_NZ
dc.contributor.authorHuang Ben_NZ
dc.date.accessioned2019-09-20T02:36:42Z
dc.date.available2019-09-20T02:36:42Z
dc.date.copyright2014en_NZ
dc.date.issued2014en_NZ
dc.description.abstractThe process of rehydration of calcium sulphate hemihydrate (CaSO4. 0.5H2O) to the crystallization of gypsum which is chemically known as calcium sulphate dihydrate (CaSO4. 2H2O) is based on the amount of water added back. Plaster moulds are used to produce both ferrous and non-ferrous castings through investment casting process using slip casting techniques conventionally. The percentage water influences the properties of moulds and castings. Taking advantage of the rapid casting process a study was conducted to measure the effect of moisture in the moulds produced by three dimensional printing and it was found that the percentage moisture is directly proportional to the green compressive strength. L9 orthogonal array and the Box-Behnken design of experiments were used to study the effect of the percentage moisture in the mould.
dc.identifier.citationProcedia Engineering, 97, 1618-1625.
dc.identifier.doi10.1016/j.proeng.2014.12.312en_NZ
dc.identifier.urihttps://hdl.handle.net/10292/12843
dc.publisherElsevier
dc.relation.urihttps://www.sciencedirect.com/science/article/pii/S1877705814033803?via%3Dihub
dc.rights© 2014 Published by Elsevier Ltd. This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/3.0/).
dc.rights.accessrightsOpenAccessen_NZ
dc.subjectHymihydrate; Dihydrate3D Printing; L9 Orthogonal Array; Box-Behnken DOE; Green Compressive Strength
dc.titleInfluence of Moisture in the Gypsum Moulds Made by 3D Printingen_NZ
dc.typeJournal Article
pubs.elements-id320817
pubs.organisational-data/AUT
pubs.organisational-data/AUT/Design & Creative Technologies
pubs.organisational-data/AUT/Design & Creative Technologies/Engineering, Computer & Mathematical Sciences
pubs.organisational-data/AUT/PBRF
pubs.organisational-data/AUT/PBRF/PBRF Design and Creative Technologies
pubs.organisational-data/AUT/PBRF/PBRF Design and Creative Technologies/PBRF ECMS
Files
Original bundle
Now showing 1 - 1 of 1
Thumbnail Image
Name:
Bobby_Singamneni_Proceedia_Engineering.pdf
Size:
1.43 MB
Format:
Adobe Portable Document Format
Description:
Journal article
Download
License bundle
Now showing 1 - 1 of 1
Thumbnail Image
Name:
AUT Grant of Licence for Scholarly Commons Feb2017.pdf
Size:
239.25 KB
Format:
Adobe Portable Document Format
Description:
Download
Collections
School of Engineering, Computer and Mathematical Sciences - Te Kura Mātai Pūhanga, Rorohiko, Pāngarau