A Single-Link Propagation-Driven Performance Study of IEEE 802.11be Wi-Fi 7 in Complex Indoor Environments

Abstract

<jats:p>IEEE 802.11be, commercially known as Wi-Fi 7, extends wireless local area network (WLAN) capability through wider channel bandwidths, higher-order modulation, and tri-band operation. However, realised indoor performance is still strongly affected by radio propagation conditions. This study presents a controlled empirical assessment of Wi-Fi 7 behaviour in a multi-storey university building by examining throughput and received signal strength (RSS) across the 2.4 GHz, 5 GHz, and 6 GHz bands using a single-link measurement setup. Six experimental scenarios were used to examine distance variation, wall penetration, line-of-sight (LOS) obstruction, floor separation, antenna orientation, and microwave interference. The measured RSS values were compared with the free-space, two-ray ground reflection, and log-distance shadowing models using mean absolute error (MAE). Six experimental scenarios were designed to isolate dominant indoor impairments, including distance variation, wall penetration, line-of-sight obstruction, floor separation, antenna orientation, and microwave interference. Measured RSS values were evaluated against free-space, two-ray, and log-distance shadowing models using mean absolute error as the comparison metric. Results show that 2.4 GHz retains greater penetration at lesser capacity, while 6 GHz offers the maximum short-range throughput under clear line-of-sight conditionsbut rapidly deteriorates with structural attenuation. Performance in all bands is greatly diminished by multi-wall blockage and line-of-sight loss. A single propagation model cannot adequately capture the divergence introduced by increasing distance and indoor attenuation, while short-range line-of-sight conditions more closely resemble deterministic predictions in terms of measured RSS alignment. Overall, the results highlight the trade-off between Wi-Fi 7’s capacity and coverage, and provide helpful advice for choosing frequencies, positioning access points, and organizing indoor coverage. The research findings provide insights into the practical deployment of next-generation Wi-Fi in multi-story buildings and residential houses.</jats:p>