Impact of Anisotropy and Strengthening Mechanisms on the Fatigue Behaviour of Laser Powder Bed Fusion Processed (FeCoNi)₈₆Al₇Ti₇ High-Entropy Alloy
Loading...
Files
Size: 22.25 MB, File format: Adobe PDF
Date
Authors
Cerezo, PM
Guraya, T
Aguilera, JA
Cruces, AS
Chen, Z
Liu, Z
Chen, ZW
Lopez-Crespo, P
Supervisor
Item type
Degree name
Journal Title
Journal ISSN
Volume Title
Publisher
Elsevier BV
Abstract
The structural integrity of additively manufactured components is frequently limited by anisotropic fatigue properties. However, the influence of precipitation strengthening on this anisotropic behaviour in high-entropy alloys remains insufficiently understood. This study investigates the fatigue crack growth resistance of a laser powder bed fusion processed (FeCoNi)₈₆Al₇Ti₇ alloy. A pronounced anisotropy in the fatigue threshold (ΔKₜₕ) is observed, samples where the crack growth direction is at a 45° angle relative to the build direction (BD) exhibit a threshold approximately 40% higher than those at 0°, parallel, and 90°, perpendicular to BD. Examination of the fatigue crack surfaces near the ΔKₜₕ region has revealed a dominant step-wise intercellular crack growth with an appearance of cyclic plastic tearing in 45° samples, while transgranular and transcellular fatigue crack growth is dominant in samples with either 0° or 90° to BD. L2₁ particles have not been found to contribute to crack propagation, but TEM analysis reveals that dense dislocations have piled up in these particles in 45° samples and this is not the case in 0° or 90° samples. It is thus proposed that the macroscopic alignment of the cell boundaries in the 45° sample obstructs the crack advance despite the favourable activation of {111} slip systems. This geometric barrier forces the crack to follow a high-energy, intermittent inter-cellular and overall a step-wise crack growth path. Ultimately, it is concluded that L2₁ particles act as effective obstacles that induce dislocation pile-ups and force crack deflection, a mechanism activated in the 45° orientation that drives its high-energy fatigue propagation mode and enhanced damage tolerance.
Description
Keywords
40 Engineering, 4016 Materials Engineering, 0910 Manufacturing Engineering, 0912 Materials Engineering, 0913 Mechanical Engineering, Materials, 4017 Mechanical engineering
Source
Materials Science and Engineering A, ISSN: 0921-5093 (Print), Elsevier BV, 971, 150534-150534. doi: 10.1016/j.msea.2026.150534
Publisher's version
Rights statement
© 2026 The Authors. Published by Elsevier B.V. Note: This article is available under the Creative Commons CC-BY-NC license and permits non-commercial use, distribution and reproduction in any medium, provided the original work is properly cited.
Permanent link
Endorsement
Review
Supplemented By
Referenced By
Creative Commons license
Except where otherwise noted, this item's license is described as © 2026 The Authors. Published by Elsevier B.V. Note: This article is available under the Creative Commons CC-BY-NC license and permits non-commercial use, distribution and reproduction in any medium, provided the original work is properly cited.