Show simple item record

dc.contributor.authorPasang, T
dc.contributor.authorSatanin, V
dc.contributor.authorRamezani, M
dc.contributor.authorWaseem, M
dc.contributor.authorNeitzert, T
dc.contributor.editorMikari, F
dc.date.accessioned2015-01-21T03:27:54Z
dc.date.available2015-01-21T03:27:54Z
dc.date.copyright2014-09
dc.identifier.citationKey Engineering Materials, vol.Volumes 622 - 623, pp.284 - 291
dc.identifier.urihttp://hdl.handle.net/10292/8332
dc.description.abstractFormability of two magnesium alloys, namely, AZ80 and ZE10, has been investigated. Both alloys were supplied with a thickness of 0.8 mm. The grain structure of the as-received AZ80 alloy showed dislocations, twins and second-phase particles and-/or precipitates distributed uniformly within grains. These were not obvious on the ZE10 alloy. The investigations were carried out at room temperature for both alloys in the as-received and heat treated conditions (410oC for 1 hour followed by water quench). The heat treatment significantly changed the grain structure of the AZ80 alloy, but did not affect the ZE10 alloy apart from grain enlargement. The formability was studied on the basis of plastic strain ratio (r) and strain hardening coefficient (n) by means of tensile testing. In the as-received condition, the ZE10 alloy had a slightly better formability ( ) than AZ80 alloy. Following heat treatment, however, the formability of the AZ80 alloy was improved significantly (by about 26%), while the ZE10 alloy did not show any significant change.
dc.languageEnglish
dc.publisherTrans Tech Publications Ltd.
dc.relation.urihttp://dx.doi.org/10.4028/www.scientific.net/KEM.622-623.284
dc.rightsCopyright © (2014) Trans Tech Publications, Switzerland. Authors retain the right to place his/her pre-publication version of the work on a personal website or institutional repository for non commercial purposes. The definitive version was published in (see Citation). The definitive version is available at www.scientific.net (see Publisher’s Version).
dc.subjectAZ80
dc.subjectFormability
dc.subjectMagnesium Alloy
dc.subjectZE10
dc.titleFormability of Magnesium Alloys AZ80 and ZE10
dc.typeJournal Article
dc.rights.accessrightsOpenAccess
dc.identifier.doi10.4028/www.scientific.net/KEM.622-623.284
aut.relation.endpage291
aut.relation.startpage284
aut.relation.volumeVolumes 622 - 623
pubs.elements-id177154


Files in this item

Thumbnail
Thumbnail

This item appears in the following Collection(s)

Show simple item record