Show simple item record

dc.date.accessioned2018-10-01T23:47:09Z
dc.date.available2018-10-01T23:47:09Z
dc.date.copyright2014-10-20en_NZ
dc.identifier.citationProcedia Engineering, Volume 81, 2014, pp. 1836-1841
dc.identifier.urihttp://hdl.handle.net/10292/11846
dc.description.abstractThe frictional properties of two types of magnesium alloys, i.e. AZ80 and ZE10 were investigated. A purpose-developed sheet metal forming simulator was used to conduct the experiments under constant plastic deformation. Both lubricated and dry sliding contact conditions were simulated and the effect of key process parameters such as contact pressure and sliding velocity on the frictional properties of these alloys were investigated. Due to the different sliding velocities, the contact pressure rose during each experiment which enables the measurement of the coefficient of friction for a wide range of contact pressures. The results showed an increase in the friction coefficients of both alloys with increasing contact pressure. Furthermore, a decrease of the friction coefficient was observed for higher sliding velocities.
dc.publisherElsevier
dc.relation.urihttps://www.sciencedirect.com/science/article/pii/S1877705814015215
dc.rights© 2014 The Authors. Published by Elsevier Ltd. This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/3.0/).
dc.titleFrictional Properties of AZ80 and ZE10 Magnesium Alloys under Dry and Lubricated Contact Conditionsen_NZ
dc.typeConference Contribution
dc.rights.accessrightsOpenAccessen_NZ
dc.identifier.doi10.1016/j.proeng.2014.10.242
dark.contributor.authorRamezani, Men_NZ
pubs.elements-id176297
aut.relation.conference11th International Conference on Technology of Plasticityen_NZ


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record