• Drillability of Titanium Alloy 6246 from Surface Quality Perspective

      Darsin, M; Pasang, T (Oriental Scientific Publishing Company, 2019)
      Drillablity derived from term of machinability, which is applied in drilling. In this study, drillability of titanium alloy 6246 has been investigated through observation of two responses of drilled holes quality, i.e. ...
    • Fatigue of Commercially Pure Titanium Dental Implants

      Pasang, T; Ramezani, M; Prygoski, M; Wanhill, R; Byrnes, R; Kamiya, O; Tanaka, K (Institute of Problems of Mechanical Engineering, 2016)
      Failure of two commercially pure titanium dental implants was analysed. The implants fractured at the abutments after only three years use. One abutment failed at the junction of the threaded and unthreaded areas, the other ...
    • Formability of Magnesium Alloys AZ80 and ZE10

      Pasang, T; Satanin, V; Ramezani, M; Waseem, M; Neitzert, T (Trans Tech Publications Ltd., 2014)
      Formability of two magnesium alloys, namely, AZ80 and ZE10, has been investigated. Both alloys were supplied with a thickness of 0.8 mm. The grain structure of the as-received AZ80 alloy showed dislocations, twins and ...
    • Latest metals research outcomes at AUT University

      Neitzert, TR; Chen, Z; Pasang, T; Singamneni, S (Metals NZ, 2011)
    • Machining cobalt-based dental alloys with tungsten carbide mills

      Takahashi, M; Pasang, T; Conor, P; Ono, H; Tanaka, K (The Society of Materials Engineering for Resources of Japan, 2014)
      Milling characteristics of dental alloys have been investigated and compared. The four differently configured tools used were made of cemented tungsten carbide. Most were uncoated but one was coated with a diamond-like ...
    • Macrosegregation in Dissimilar-metal Fusion Welding

      Pasang, T; Soysal, T; Kou, S; Tat, D (Elsevier, 2016)
      Solute segregation on a macroscopic scale in a weld between two dissimilar metals or alloys has long been recognized, but fundamental understanding of macrosegregation in dissimilar-metal welding is still lacking. Two ...
    • Mechanical Properties and Microstructure of Laser Welded Ti-6Al-2Sn-4Zr-2Mo (Ti6242) Titanium Alloy

      Chamanfar, A; Pasang, T; Ventura, A; Misiolek, WZ (Elsevier, 2016)
      Room temperature tensile properties and microhardness of a laser welded Ti-6Al-2Sn-4Zr-2Mo (Ti6242) titanium alloy sheet were examined and correlated to the microstructure evolution across the weld. Tensile testing integrated ...
    • Microstructure and Mechanical Properties of Laser Welded Ti–10V–2Fe–3Al (Ti1023) Titanium Alloy

      Chamanfar, A; Huang, M-F; Pasang, T; Tsukamoto, M; Misiolek, WZ (Elsevier BV, 2020)
      The microstructure, microhardness, tensile properties, and fracture characteristics of the laser welded Ti–10V–2Fe–3Al (Ti1023) titanium alloy in the as-welded condition were examined. The mechanical properties were related ...
    • Modelling of GTAW Weld Pool under Marangoni Convection

      Nates, RJ; Wang, G; Pasang, T (SCENZ-IChemE, 2013)
      With several different fusion welding processes, the melted weld pool profile which ultimately solidifies to form the fusion zone, diverging greatly by a wide variety of factors, e.g. base material, workpiece size, machine ...
    • Research on various welding methods on aerospace titanium alloys: collaboration between Akita University and AUT University

      Pasang, T; Tao, Y; Miyano, Y; Kamiya, O (The Society of Materials Engineering for Resources of Japan, 2014)
      In the past two decades or so, titanium and its alloys have found a significant increase in the aerospace applications. One of the reasons is associated with the introduction of various new titanium alloys. Ti-5Al-5V-5Mo-3Cr ...