• Plug-in Electric Bus Depot Charging with PV and ESS and Their Impact on LV Feeder

      Arif, SM; Lie, TT; Seet, BC; Ahsan, SM; Khan, HA
      Plug-in electric buses (PEBs) are a promising alternative to conventional buses to provide a sustainable, economical, and efficient mode of transportation. However, electrification of public transportation leads to a ...
    • Pool Complex, in making worlds

      Cullen, P (Auckland Art Gallery, 2007)
      Pool complex was made in 1994-1995 and was never exhibited before going into the collection of the Auckland Art Gallery. In common with many works I've made since the early 1990's it employed found furniture and dexion.
    • Pool Complex, in Making Worlds.

      Cullen, P (AUT University, 2007)
      Pool complex was made in 1994-1995 and was never exhibited before going into the collection of the Auckland Art Gallery. In common with many works I've made since the early 1990's it employed found furniture and dexion.
    • Pop, Power and Politics: Kiwi FM and the ‘Third Way’ in New Zealand

      Mollgaard, M (MEDIANZ, 2016)
      In 2005 a major multi-national media company launched a New Zealand radio network that played only New Zealand music—Kiwi FM. Within a year it was clear that the experiment had failed, with the ...
    • Porous ceramic filters through 3d printing

      Withell, AJ; Diegel, O; Grupp, I; Reay, S (Centre for Rapid and Sustainable Product Development, 2011)
      This paper describes current and on-going work in adapting Z-Corp 3D printers to operate with low-cost ceramic materials. The components produced with these clay-based ceramic powders can be fired to produce strong, complex ...
    • Possibles and probables: playing with Carlaw Park scoreboard signs

      Valentine, J (The National Grid, 2006)
      No abstract
    • Post screen not displayed

      Charlton, J (Edicao, 2014)
      It seems that we are always waiting for screens. But what are we really waiting for? Treating the screen as an object of sculptural concern, this paper attempts to understand how inherent event-relationships might escape ...
    • Potential Kick Velocity Distribution of Black Hole X-ray Binaries and Implications for Natal Kicks

      Atri, P; Miller-Jones, JCA; Bahramian, A; Plotkin, RM; Jonker, PG; Nelemans, G; Maccarone, TJ; Sivakoff, GR; Deller, AT; Chaty, S; Torres, MAP; Horiuchi, S; McCallum, J; Natusch, T; Phillips, CJ; Stevens, J; Weston, S
      We use Very Long Baseline Interferometry to measure the proper motions of three black hole X-ray binaries (BHXBs). Using these results together with data from the literature and Gaia-DR2 to collate the best available ...
    • Power & persuasion: constructing identity in religious communications

      Nairn, AM; Nelson, FM; Johnson, RJK (The Australian and New Zealand Communication Association (ANZCA), 2015)
      According to Geertz (2002, p. 19), religion is “a system of symbols which acts to establish powerful, pervasive and long lasting moods and motivations” and provides adherents with a means for understanding the world. The ...
    • Practice-based and material focused: a craft approach to teaching design intuition

      Inder, S; Reay, S (The Hong Kong Polytechnic University School of Design, Hong Kong Design Institute (member of VTC Group) and Hong Kong Design Centre, 2014)
      Successful collaborative design harmonizes diverse inputs from disciplines with often contrasting paradigms (Reay & Withell, 2013). Designers must respond to these challenges using both objective and subjective, quantitative ...
    • Practice-led Doctoral Research and the Nature of Immersive Methods

      Mortensen Steagall, M; Ings, W (Anhembi Morumbi University, 2018)
      Practice-led research enables art and design practitioners approaches to discovering, applying and communicating original knowledge that have direct implications for their practice. Since the 1980s, internationally, the ...
    • Practitioner education - degrees of difference?

      Clear, Tony (ACM, 2000)
      No abstract.
    • Practitioners of design for quality

      Robotham, AJ (WDK, 1999)
      Building in high quality continues to be the driving force of new product development activity in industry. Yet as we come to the end of the 1990s and look forward to the challenges in Design Research of the new millennium, ...
    • Precise guidance to dynamic test generation

      Pears, RL; Fong, A; Do, T; Do, T; Fong, A; Pears, RL (DBLP, 2012)
      Dynamic symbolic execution has been shown an effective technique for automated test input generation. However, its scalability is limited due to the combinatorial explosion of the path space. We propose to take advantage ...
    • Precise time transfer by Means of Geodetic VLBI Technique - Part II -

      Takiguchi, H; Koyama, Y; Ichikawa, R; Ishii, A; Hobiger, T (The Geodetic Society of Japan, 2007)
      No abstract.
    • Predicting functional properties of milk powder based on manufacturing data in an industrial-scale powder plant

      Rimpilainen, V; Kaipio, J; Depree, N; Young, B; Wilson, DI (Elsevier, 2015)
      The fundamental science relating key physical and functional properties of milk powder to plant operating conditions is complex and largely unknown. Consequently this paper takes a data-driven approach to relate the routinely ...
    • Predicting the Pumping Characteristics of Multiple Parallel Tube Air-lift Pumps

      Yousuf, N; Anderson, T; Gschwendtner, M; Nates, R (Australasian Fluid Mechanics Society, 2016)
      Air-lift pumps have begun to receive a high degree of attention due to the absence of mechanical components and the potential for their use in renewable energy applications. One of the principal challenges of the air-lift ...
    • Prediction model for chilli productivity based on climate and productivity data

      Septiawan, R; Shanmuganathan, S; Komaruddin, A; Sulistya, B; Nur, A (IEEE, 2012)
      The global trade increases the competition in agricultural product export all around the world.The Indonesian Agricultural Industry needs to improve their competitiveness by fulfilling the requirements and restrictions ...
    • Preliminary Evaluation of Second-generation n-CPAP Machine Pilot Sleep Study Data

      White, DE; Bartley, J; Campbell, AJ; Neill, AM (Sleep Research Society, 2018)
      No abstract.
    • Preliminary Research on Modelling and Control of Two Line Kites for Power Generation

      Yan, A; Yee, N; Huang, L (2017)
      Wind power is the second largest renewable resource from which we can obtain electricity besides hydropower. Wind farms have had significant growth in past decades; however, they require a massive investment to setup ...