Developing a Novel Extra-Aortic Cuff With Peristaltic Motion and Counterpulsation to Assist Heart Function

Date
2017
Authors
Wangdee Jones, Parn Naruenart
Supervisor
Lowe, Dr. Andrew
Kilby, Jeffrey
Item type
Thesis
Degree name
Master of Engineering
Journal Title
Journal ISSN
Volume Title
Publisher
Auckland University of Technology
Abstract

The development of a prototype extra-aortic balloon cuff with peristaltic motion and counterpulsation system is explored to investigate the practical feasibility for potential future treatments for chronic heart failure. This concept is an extension of an existing clinical heart assisting device called C-Pulse® created by Sunshine Heart which is used to treat patients with New York Heart Association Class III and ambulatory Class IV heart failure. Both software simulation and hardware-based experimental work are undertaken. The software simulation of a one-dimensional pressure wave propagation through an aortic segment and the influence of an external peristaltic movement are explored using Matlab® (MathWorks®, United States). Simulation results show characteristic differences between a normal pressure waveform and an augmented waveform. The hardware work was divided into three parts – development of a phantom aorta, cardiovascular simulation platform, and the peristaltic extra-aortic balloon cuff prototype. A phantom aorta was made from Dragon Skin® 10 with geometries and properties similar to that of the biological physiological human aorta. A devised cardiovascular simulation platform with the phantom aorta attached was constructed and utilised as a testing platform for the functionality of the peristaltic extra-aortic balloon cuff prototype. The prototype was developed using an Arduino based microcontroller which drives four pneumatic pumps that inflate and deflate extra-aortic balloon cuffs, attached to the descending aorta, in a counterpulsating manner to the natural heartbeat. The peristaltic extra-aortic balloon cuff prototype was able to significantly increase the mean aortic pressure from ~92 mmHg to ~96 mmHg (P<0.05). The flow velocity waveform in the ascending aorta was also altered – increasing the mean diastolic flow from 13.47 cm/s to 17.73 cm/s (P<0.05).

Description
Keywords
Phantom Aorta , Peristaltic Motion , Counterpulsation , Assist Heart Function , Biomedical , Extra-aortic Balloon , Arduino , Cardiovascular Simulation Platform , Molding Phantom , 1-D Wave , PWV , Aortic Pressure , Sunshine Heart , C-Pulse , Prototype , Mechanical Heart
Source
DOI
Publisher's version
Rights statement
Collections